Advanced Fire Detection and Battery Energy Storage Systems (BESS)

May 10, 2024

min read

Battery Energy Storage Systems (BESSs) play a critical role in the transition to renewable energy by helping meet the growing demand for reliable, yet decentralized power on a grid-scale.

Sustainable energy storage system installed near solar collection panels and wind turbines

Download PDF

What Are Battery Energy Storage Systems (BESSs)? 

As the world transitions to renewable energy, Battery Energy Storage Systems (BESSs) are helping meet the growing demand for reliable, yet decentralized power on a grid scale. These systems gather surplus energy from solar and wind sources, storing it in batteries for later discharge. This process helps stabilize the grid by ensuring a steady power supply and mitigating the variability associated with renewables. Excess daytime electricity from solar farms, for instance, can be stored at a BESS facility for use overnight.

More than 90% of these grid-sized energy storage systems utilize lithium-ion batteries with spending for new facilities expected to grow at an annual rate of more than 30%, reaching $12.1 billion by 2025. Lithium-ion batteries offer higher energy density, faster charging and longer life than traditional batteries.

Addressing BESS Safety Concerns 

Lithium-ion batteries in energy storage systems have distinct safety concerns that may present a serious fire hazard unless operators understand and address the risk proactively with holistic, advanced fire detection and prevention methods.

Once a lithium-ion battery overheats in a BESS and the process of “thermal runaway” occurs, it can be nearly impossible to extinguish, potentially causing catastrophic damage and risking the lives of first responders called to put out the fire. Such an event occurred in April 2022 at a 10 MW storage facility in Chandler, AZ, where fire crews struggled to extinguish a blaze for four days. In 2019, a fire and explosion at an energy storage system in Surprise, AZ, near Phoenix, was triggered by an overheated lithium-ion battery injuring several first responders and resulting in significant damage to the facility and disruption to the surrounding community.

Abuse Factors

Lithium-ion cells are prone to failing if not kept within specific environmental conditions. When these conditions are compromised, so-called abuse factors can lead to thermal runaway. Awareness of these abuse factors can help operators prevent thermal runaway at its earliest stage.


Electrical Abuse

This occurs when a battery exceeds voltage limits during charge or discharge and overheats. The simultaneous operation of these batteries poses the risk that any one of the battery cells could exceed voltage limits during charge or discharge and can cause overheating that triggers a potential fire event.

Mechanical Abuse

This can be caused by physical or mechanical damage to the battery such as a crush, indentation, or puncture from vibration or shock.

Thermal Abuse

This is initiated when the operational temperature exceeds the limits of the battery. If caused by overcharging, the extra current triggers a chemical reaction that breaks down the battery’s organic liquid electrolytes and changes them from a liquid to a highly flammable gaseous state.


When an abuse factor continues unaddressed, more of the liquid electrolyte from the battery will convert to gas, causing an internal build-up of pressure sufficient to vent or rupture the battery seals and resulting in an off-gassing event. Eventually, as more gas is generated, internal pressure and heat continue to increase rupturing, melting the separator, and releasing the smoke. By this point, thermal runaway is imminent.

A single cell failure can quickly overheat and spread to surrounding cells. That’s why the earliest possible detection of a battery failure is crucial to preventing a potential disaster caused by thermal runaway.

It is common for mobile BESS units to utilize traditional heat and smoke detectors in interior spaces, but these sensors are not equipped to provide sufficiently early warning of an impending fire. They are only sensitive enough to detect smoke after a fire has started, which is much too late to stop thermal runaway from igniting an entire bank of batteries. Furthermore, these pre-installed systems cannot be serviced, monitored, or maintained to ensure they are in basic working order due to unit design.

BESS Use Case 1.png

The Best Protection is Prevention

A holistic approach using advanced detection and performance-based solutions combined with battery management systems can work together to establish layers of safety and fire protection.

Battery Management Systems monitor voltage, current, and temperature to identify any battery abuse factors. While this is an important initial layer, it should not be the only layer of protection.

Temperature and Humidity Sensors measure the temperature of the air surrounding the sensor including ambient room temperature, shock/vibration/AC power quality and conditions.

Advanced detection innovations provide the very earliest possible intelligence about conditions inside the BESS. These early warning systems can be professionally tested, serviced, maintained, and monitored at the fire alarm control panel.

  • Thermal Imaging Cameras graphically illustrate the temperature of the objects and equipment the camera can see.
  • Off-Gas Detection technologies can provide an alert in the initial stage of lithium-ion battery failure when venting of electrolyte solvent vapors begins and prior to thermal runaway.
  • Very Early Warning Smoke Detection systems use ultra-sensitive sensors to provide early warning of an impending fire event, buying time to initiate an appropriate emergency response to prevent injury, property damage or business disruption.

If an off-gas event occurs, sensors can be used to quickly notify facility operators to shut down the system or contact first responders to mitigate the spread of fire from cell to cell.

BESS Use Case 2.png

Responding to the Ever-Evolving Fire and Life Safety Industry 

Fire and life safety industry standards are evolving to minimize the fire risks associated with BESSs. Ensuring appropriate criteria to address the safety of such systems in building codes and fire codes is an important part of protecting the public, building occupants, and emergency responders.

International Fire Code (IFC) 2021 1207.8.3 Chapter 12, Energy Systems requires that storage batteries, prepackaged stationary storage battery systems, and pre-engineered stationary storage battery systems are segregated into stationary battery bundles not exceeding 50 kWh each, and each bundle is spaced a minimum separation of 10 feet apart and from the building wall.

National Fire Protection Agency (NFPA) 855 establishes requirements for design, construction, installation, commissioning, operation, maintenance and decommissioning of stationary energy storage systems and applies to battery installations over 70 kWh.

UL 9540—Standard for Safety Energy Storage Systems and Equipment outlines safety requirements for the integrated components of an energy storage system requiring that electrical, electro-chemical, mechanical and thermal energy storage systems operate at an optimal safety level.

UL 9540A—Test Method for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems implements quantitative data standards to characterize potential battery storage fire events and establishes battery storage system fire testing on the cell level, module level, unit level and installation level.

Because these requirements are continuously evolving, careful investigation of all standards must be performed before beginning the design, construction, installation, and operation of a BESS.

Lithium-ion battery storage facilities are pivotal to the transition to a greener economy. Just as eco-friendly technology is evolving to strengthen the renewable energy industry, advanced fire prevention and life safety technology must also advance to protect it. Off-gas detection, very early warning smoke detection and thermal imaging camera systems combined with advanced alarm monitoring can help keep BESSs operating at the highest levels of safety.

BESS Use Case 3.png

Fire Detection and Prevention Solutions

Everon’s advanced detection technologies and performance-based solutions for Battery Energy Storage Systems work together to establish layers of safety and fire prevention—beyond the prescriptive code minimum requirements.

Energy Storage Protection